#!/hint/sh

# BACKWARDS COMPATIBILITY NOTES:
#
# Stable names and options:
# * `resh-collect -version` / `resh-postcollect -version` is used to detect version mismatch.
#   => The go-like/short `-version` option needs to exist for new resh-(post)collect commands in all future version.
#   => Prefer using go-like/short `-version` option so that we don't have more options to support indefinitely.
# * `__resh_preexec <CMDLINE>` with `__RESH_NO_RELOAD=1` is called on version mismatch.
#   => The `__resh_preexec` function needs to exist in all future versions.
#   => Make sure that `__RESH_NO_RELOAD` behavior is not broken in any future version.
#   => Prefer only testing `__RESH_NO_RELOAD` for emptyness instead of specific value
# * `__resh_reload_msg` is called *after* shell files reload
#   => The function shows a message from the already updated shell files
#   => We can drop this function at any time - the old version will be used

# Backwards compatibilty: Please see notes above before making any changes here.
__resh_reload_msg() {
    printf '\n'
    printf '+--------------------------------------------------------------+\n'
    printf '| New version of RESH shell files was loaded in this terminal. |\n'
    printf '| This is an informative message - no action is necessary.     |\n'
    printf '| Please restart this terminal if you encounter any issues.    |\n'
    printf '+--------------------------------------------------------------+\n'
    printf '\n'
}

# (pre)collect
# Backwards compatibilty: Please see notes above before making any changes here.
__resh_preexec() {
    if [ "$(resh-collect -version)" != "$__RESH_VERSION" ] && [ -z "${__RESH_NO_RELOAD-}" ]; then
        # Reload shell files and restart __resh_preexec - i.e. the full command will be recorded only with a slight delay.
        # This should happens in every already open terminal after resh update.
        # __RESH_NO_RELOAD prevents recursive reloads
        # We never repeatadly reload the shell files to prevent potentially infinite recursion.
        # If the version is still wrong then error will be raised by `resh-collect -requiredVersion`.

        source ~/.resh/shellrc
        # Show reload message from the updated shell files
        __resh_reload_msg
        # Rerun self but prevent another reload. Extra protection against infinite recursion.
        __RESH_NO_RELOAD=1 __resh_preexec "$@"
        return $?
    fi
    __RESH_COLLECT=1
    __RESH_RECORD_ID=$(resh-generate-uuid)
    # TODO: do this in resh-collect
    # shellcheck disable=2155
    local git_remote="$(git remote get-url origin 2>/dev/null)"
    # TODO: do this in resh-collect
    __RESH_RT_BEFORE=$(resh-get-epochtime)
    resh-collect -requireVersion "$__RESH_VERSION" \
        --git-remote "$git_remote" \
        --home "$HOME" \
        --pwd "$PWD" \
        --record-id "$__RESH_RECORD_ID" \
        --session-id "$__RESH_SESSION_ID" \
        --session-pid "$$" \
        --shell "$__RESH_SHELL" \
        --shlvl "$SHLVL" \
        --time "$__RESH_RT_BEFORE" \
        --cmd-line "$1"
    return $?
}

# postcollect
# Backwards compatibilty: Please see notes above before making any changes here.
__resh_precmd() {
    # Get status first before it gets overriden by another command.
    local exit_code=$?
    # Don't do anything if __resh_preexec was not called.
    # There are situations (in bash) where no command was submitted but __resh_precmd gets called anyway.
    [ -n "${__RESH_COLLECT-}" ] || return
    if [ "$(resh-postcollect -version)" != "$__RESH_VERSION" ]; then
        # Reload shell files and return - i.e. skip recording part2 for this command.
        # We don't call __resh_precmd because the new __resh_preexec might not be backwards compatible with variables set by old __resh_preexec.
        # This should happen only in the one terminal where resh update was executed.
        # And the resh-daemon was likely restarted so we likely don't even have the matching part1 of the comand in the resh-daemon memory.
        source ~/.resh/shellrc
        # Show reload message from the updated shell files
        __resh_reload_msg
        return
    fi
    unset __RESH_COLLECT

    # do this in resh-postcollect
    # shellcheck disable=2155
    local rt_after=$(resh-get-epochtime)
    resh-postcollect -requireVersion "$__RESH_VERSION" \
        --exit-code "$exit_code" \
        --record-id "$__RESH_RECORD_ID" \
        --session-id "$__RESH_SESSION_ID" \
        --shlvl "$SHLVL" \
        --time-after "$rt_after" \
        --time-before "$__RESH_RT_BEFORE"
    return $?
}

# Backwards compatibilty: No restrictions. This is only used at the start of the session.
__resh_session_init() {
    resh-session-init -requireVersion "$__RESH_VERSION" \
        --session-id "$__RESH_SESSION_ID" \
        --session-pid "$$"
    return $?
}

# Backwards compatibilty: Please see notes above before making any changes here.
__resh_widget_control_R() {
    # This is a very bad workaround.
    # Force bash-preexec to run repeatedly because otherwise premature run of bash-preexec overshadows the next proper run.
    # I honestly think that it's impossible to make widgets work in bash without hacks like this.
    # shellcheck disable=2034
    __bp_preexec_interactive_mode="on"

    local PREVBUFFER=$BUFFER

    local status_code
    local git_remote; git_remote="$(git remote get-url origin 2>/dev/null)"
    if [ "$(resh-cli -version)" != "$__RESH_VERSION" ] && [ -z "${__RESH_NO_RELOAD-}" ]; then
        source ~/.resh/shellrc
        # Show reload message from the updated shell files
        __resh_reload_msg
        # Rerun self but prevent another reload. Extra protection against infinite recursion.
        __RESH_NO_RELOAD=1 __resh_widget_control_R "$@"
        return $?
    fi
    BUFFER=$(resh-cli -requireVersion "$__RESH_VERSION" \
        --git-remote "$git_remote" \
        --pwd "$PWD" \
        --query "$BUFFER" \
        --session-id "$__RESH_SESSION_ID" \
    )
    status_code=$?
    if [ $status_code = 111 ]; then
        # execute
        if [ -n "${ZSH_VERSION-}" ]; then
            # zsh
            zle accept-line
        elif [ -n "${BASH_VERSION-}" ]; then
            # bash
            # set chained keyseq to accept-line
            bind '"\u[32~": accept-line'
        fi
    elif [ $status_code = 0 ]; then
        if [ -n "${BASH_VERSION-}" ]; then
            # bash
            # set chained keyseq to nothing
            bind -x '"\u[32~": __resh_nop'
        fi
    else
        echo "RESH SEARCH APP failed"
        printf "%s" "$buffer" >&2
        BUFFER="$PREVBUFFER"
    fi
    CURSOR=${#BUFFER}
}

# Wrapper for resh-cli for calling resh directly
resh() {
    if [ "$(resh-cli -version)" != "$__RESH_VERSION" ] && [ -z "${__RESH_NO_RELOAD-}" ]; then
        source ~/.resh/shellrc
        # Show reload message from the updated shell files
        __resh_reload_msg
        # Rerun self but prevent another reload. Extra protection against infinite recursion.
        __RESH_NO_RELOAD=1 resh "$@"
        return $?
    fi
    local buffer
    local git_remote; git_remote="$(git remote get-url origin 2>/dev/null)"
    buffer=$(resh-cli -requireVersion "$__RESH_VERSION" \
        --git-origin-remote "$git_remote" \
        --pwd "$PWD" \
        --session-id "$__RESH_SESSION_ID" \
        "$@"
    )
    status_code=$?
    if [ $status_code = 111 ]; then
        # execute
        echo "$buffer"
        eval "$buffer"
    elif [ $status_code = 0 ]; then
        # paste
        echo "$buffer"
    elif [ $status_code = 130 ]; then
        true
    else
        printf "%s" "$buffer" >&2
    fi
}

__resh_widget_control_R_compat() {
   __bindfunc_compat_wrapper __resh_widget_control_R
}

__resh_nop() {
    # does nothing
    true
}

# shellcheck source=../submodules/bash-zsh-compat-widgets/bindfunc.sh
. ~/.resh/bindfunc.sh

__resh_bind_control_R() {
    bindfunc '\C-r' __resh_widget_control_R_compat
    if [ -n "${BASH_VERSION-}" ]; then
        # fuck bash
        bind '"\C-r": "\u[31~\u[32~"'
        bind -x '"\u[31~": __resh_widget_control_R_compat'

        # execute
        # bind '"\u[32~": accept-line'

        # just paste
        # bind -x '"\u[32~": __resh_nop'
        true
    fi
    return 0
}